PTP/4/hwPTPRingFiberLengthChange_clear: The length change value of the ring-network optical fiber is determined. (hwPtpPortName=[hwPtpPortName], hwPtpPortIfIndex=[hwPtpPortIfIndex], hwPtpPortRingFiberLengthChangeValue=[hwPtpPortRingFiberLengthChangeValue], hwPtpPortRingFiberLengthChangeValueFlag=[hwPtpPortRingFiberLengthChangeValueFlag])
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
hwPtpPortName |
Indicates the name of the current port. |
|
hwPtpPortIfIndex |
Interface index |
|
hwPtpPortRingFiberLengthChangeValue |
Indicates the new time offset caused by the fiber length change of the current port. The new time offset is the sum of the currently configured fiber asymmetry compensation value. (unit: ns) |
|
hwPtpPortRingFiberLengthChangeValueFlag |
Indicates the plus or minus sign of the new time offset caused by the fiber change of the current port. The options are as follows: Negative sign (0) Positive sign (1) |
A new asymmetric correction value was set on the port where the fiber-length-change alarm was generated.
This message is informational only, and no action is required.