SYSTEM/2/hwPatchInstallFail_clear: The patch-operation failure alarm is cleared. (SlotIndex=[SlotIndex], PatchIndex=[PatchIndex], PackageName=[PackageName], PackageVersion=[PackageVersion], FailReason=[FailReason], PhysicalName=[PhysicalName].)
In VS mode, this log is supported only by the admin VS.
| Parameter Name | Parameter Meaning |
|---|---|
|
SlotIndex |
Index of the board where the patch file is located. If it is set to 128, the device reports only one alarm. |
|
PatchIndex |
Index of the patch file. |
|
PackageName |
Patch file name. |
|
PackageVersion |
Patch file version. |
|
FailReason |
Cause of the patch installation failure. |
|
PhysicalName |
Name of the entity where the patch file is located. When the value of SlotIndex is 128, PhysicalName indicates the system control board, which reports alarms on behalf of the device. |
This log message is informational only, and no action is required.