RM/2/hwPublicIpv6PrefixExceed_clear: The number of public IPv6 prefixes falls below the maximum value. (PrefixCount=[PrefixCount], MaxValue=[MaxValue])
| Parameter Name | Parameter Meaning |
|---|---|
|
PrefixCount |
Number of IPv6 public route prefixes in the routing table |
|
MaxValue |
Maximum number of IPv6 public route prefixes that is allowed |
Cause1: The network administrator deleted some routes from the routing table or the number of routes learned by dynamic protocols decreased due to network topology changes.
Cause2: The maximum number of IPv6 public route prefixes supported by the system was increased or the limit on the number of IPv6 public route prefixes was deleted.