Configuration Examples for User-Side Multicast

This section provides user-side multicast configuration examples, including networking requirements, precautions and configuration roadmap.

Example for Configuring User-Side Multicast for PPPoE Access Users: This section provides an example for configuring user-side multicast for PPPoE access users.

Example for Configuring User-Side Multicast for IPoE Access Users: This section provides an example for configuring user-side multicast service for Internet Protocol over Ethernet (IPoE) access users.

Example for Configuring IPv4 User-Side Multicast for a VPN: This section describes how to configure IPv4 user-side multicast for a VPN.

Example for Configuring BAS Multicast for Layer 3 Leased Line Access Users: This section provides an example for configuring multicast services for layer 3 leased line users accessing from BAS interface.

Example for Configuring User-side Multicast CAC for PPPoE Access Users: This section provides an example for configuring user-side multicast CAC for PPPoE access users.

Example for Configuring User-side Multicast CAC for IPoE Access Users: This section provides an example for configuring user-side multicast CAC for IPoE access users.

Example for Configuring Static Multicast for PPPoE Access Users: This section provides an example for configuring static multicast for PPPoE access users. The example provides the networking requirements, configuration roadmap, configuration procedure, and configuration files.

Example for Configuring Static Multicast for IPoE Access Users: This section provides an example for configuring static multicast for IPoE access users. The example provides the networking requirements, configuration roadmap, configuration procedure, and configuration files.

Parent Topic: IPv4 User-Side Multicast Configuration

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic