Verifying the Configuration of MS-PW Redundancy When a PE Is Single-Homed to an SPE

After configuring service PWs, check the configurations.

Procedure

  1. Run the display mpls switch-l2vc [ brief | state { up | down } | ip-address vc-id encapsulation encapsulation-type ] command to check information about PW label switching that implements MS-PWs.
Parent Topic: Configuring MS-PW Redundancy When a PE Is Single-Homed to an SPE
Copyright © Huawei Technologies Co., Ltd.
Copyright © Huawei Technologies Co., Ltd.
< Previous topic