Configuration Examples for OSPFv3

Example for Configuring Basic OSPFv3 Functions

This section describes how to configure basic OSPFv3 functions, including enabling OSPF on each router and specifying network segments in different areas.

Example for Configuring OSPFv3 DR Election

This section describes how to set the DR priority on an interface for DR election on a broadcast network.

Example for Configuring OSPFv3 IP FRR

This section describes the procedure for configuring OSPFv3 IP FRR, including how to block FRR on certain interfaces to prevent the links connected to these interfaces from functioning as backup links and how to bind OSPFv3 IP FRR to a BFD session.

Example for Configuring BFD for OSPFv3

This section describes how to configure BFD for OSPFv3. After BFD for OSPFv3 is configured, BFD can rapidly detect link faults and report them to OSPFv3 so that service traffic can be transmitted through the backup link.

Example for Configuring IPSec for OSPFv3

Example for Configuring OSPFv3 Route Summarization on an ASBR

This section provides an example showing how to configure OSPFv3 route summarization on an ASBR.

Example for Configuring OSPFv3 Route Summarization on an ABR

This section provides an example showing how to configure OSPFv3 route summarization on an ABR.

Example for Configuring an OSPFv3 NSSA

This section provides an example for configuring an OSPFv3 not-so-stubby area (NSSA).