Verifying the Configuration of SNMP Proxy Using User-Defined Parameter Settings

After configuring SNMP proxy using user-defined parameters, verify the SNMP configuration on the managed device and check whether the middle-point device communicates with the managed device based on user-defined parameter settings.

Prerequisites

SNMP proxy has been configured using user-defined parameter settings.

Procedure

Verify the SNMP proxy configuration on the middle-point device.
- Run the display snmp-agent proxy community command to check SNMP proxy community information.
- Run the display snmp-agent proxy rule command to check proxy rules for SNMP packets.
- Run the display snmp-agent proxy target-host command to check target host information.
- Run the display snmp-agent usm-user command to check SNMPv3 proxy user information.
- Run the display snmp-agent proxy statistics command to check statistics about SNMP proxy packets.
Verify the SNMP configuration on the managed device.
- For SNMPv1, see Verifying the Configuration for a Device to Communicate with an NMS Using SNMPv1.
- For SNMPv2c, see Verifying the Configuration for a Device to Communicate with an NMS Using SNMPv2c.
- For SNMPv3, see Verifying the Configuration for a Device to Communicate with an NMS Using SNMPv3 USM User.