This section describes how to configure a traffic switching policy for a hot-standby CR-LSP. The traffic switching policy determines whether to switch traffic back to the primary CR-LSP and sets a switchback delay.
When a primary CR-LSP is Down, traffic switches to the hot-standby CR-LSP. When the primary CR-LSP is Up, traffic switches back by default. This configuration provides the flexibility to control the traffic switchover behavior.
The system view is displayed.
The view of the MPLS TE tunnel interface is displayed.
The traffic switching policy is configured for the hot-standby CR-LSP and the switchback delay is set.
The configurations are committed.