Configuring Interference Detection

Procedure

1. Run system-view

   The system view is displayed.

2. Run wlan

   The WLAN view is displayed.

3. Run radio-2g-profile name profile-name

   Or run radio-5g-profile name profile-name

   The 2G or 5G radio profile view is displayed.

4. Run interference detect-enable

   The interference detection function is enabled.

   By default, the interference detection function is disabled.

5. (Optional) Configure interference detection thresholds.

   • Run the interference co-channel threshold threshold-value command to configure the alarm threshold for co-channel interference.

     By default, the alarm threshold for co-channel interference is 50%.

   • Run the interference adjacent-channel threshold threshold-value command to configure the alarm threshold for adjacent-channel interference.

     By default, the alarm threshold for adjacent-channel interference is 50%.

   • Run the interference station threshold threshold-value command to configure the alarm threshold for STA interference.

     By default, the alarm threshold for STA interference is 32.

6. Run quit

   Return to the WLAN view.

7. Bind the radio profile to an AP group or a specific AP. For the detailed procedure, see Binding a Radio Profile.