The SSM of output above threshold notification. (hwClockAttributeChassisIndex=[hwClockAttributeChassisIndex], hwClockChassisId=[hwClockChassisId], hwClockPllId=[hwClockPllId], hwClockAttributeOutThreshold=[hwClockAttributeOutThreshold], hwClockAttributeOutValue=[hwClockAttributeOutValue], hwClockCurSourceName=[hwClockCurSourceName])
In VS mode, this trap is supported only by the admin VS.
| Trap Attribute | Description |
|---|---|
Alarm or Event |
Alarm |
Trap Severity |
Warning |
Mnemonic Code |
hwClockSourceOutputBelowThreshold |
Trap OID |
1.3.6.1.4.1.2011.5.25.186.1.8.14 |
MIB |
HUAWEI-CLOCK-MIB |
Alarm ID |
0x09af0004 |
Alarm Name |
hwClockSourceOutputBelowThreshold |
Alarm Type |
equipmentAlarm |
Raise or Clear |
Clear |
Match trap |
CLKM_1.3.6.1.4.1.2011.5.25.186.1.8.6 hwClockSourceOutputBelowThreshold |
| Parameter | Description |
|---|---|
hwClockAttributeChassisIndex |
Indicates the index of the chassis where the non-PTP clock source is located. In the case of a single chassis, the index is 1. For a chassis where a PTP clock source is located, the index is invalid. |
hwClockChassisId |
Chassis id of the clock source. |
hwClockPllId |
Id of the clock source type. values: System(1), system PLL. sync2M-1(2), 2M PLL-1. sync2M-2(3), 2M PLL-2. |
hwClockAttributeOutThreshold |
Threshold of the external Clock output. values: prc(2). ssua(4). ssub(8). sec(11). dnu(15). The default value is dnu,and that can config as prc,sec,ssua,ssub. |
hwClockAttributeOutValue |
SSM of the external Clock output. values: prc(2). ssua(4). ssub(8). sec(11). dnu(15). |
hwClockCurSourceName |
Name of the current clock source. |
| VB OID | VB Name | VB Index |
|---|---|---|
1.3.6.1.4.1.2011.5.25.186.1.7.4 |
hwClockChassisId |
- |
1.3.6.1.4.1.2011.5.25.186.1.7.6 |
hwClockPllId |
- |
1.3.6.1.4.1.2011.5.25.186.1.9.1.8 |
hwClockAttributeOutThreshold |
hwClockAttributeChassisIndex |
1.3.6.1.4.1.2011.5.25.186.1.7.7 |
hwClockAttributeOutValue |
- |
1.3.6.1.4.1.2011.5.25.186.1.7.2 |
hwClockCurSourceName |
- |