This section describes how to configure dual-stack static user access on a network where a CPE works in bridging mode. Configure static IPv4 and IPv6 addresses for a client, and allow the client to be triggered to go online by sending NS/NA or IPv6 packets. A networking diagram is provided to help you understand the configuration procedure.
This section describes how to configure dual-stack static user access on a network where a CPE works in routing mode. A networking diagram is provided to help you understand the configuration procedure. The example provides the networking requirements, configuration roadmap, configuration procedure, and configuration files.
This section provides an example for configuring RADIUS for user authentication and accounting. The RADIUS attributes supported by a Huawei device and a RADIUS server may be different. Python scripts can be loaded to implement flexible interoperation of RADIUS attributes.
This section provides an example for configuring a RADIUS server to assign IP addresses from an address pool based on PPPoE+. With the Option 82 function enabled, a BRAS assigns IP addresses to PPPoE users based on the address pool information carried in an authentication response packet sent by the RADIUS server.