Configuration Examples for iFIT

Example for Configuring 5-tuple-based iFIT on an L3VPN HVPN

This section provides an example for configuring iFIT hop-by-hop measurement based on 5-tuple on an L3VPN HVPN.

Example for Configuring Peer IP-based iFIT on an L3VPN

This section provides an example for configuring peer IP-based iFIT end-to-end measurement on an L3VPN.

Example for Configuring Peer IP-based iFIT on an EVPN L3VPN

This section provides an example for configuring peer IP-based iFIT end-to-end measurement on an EVPN L3VPN.

Example for Configuring Peer Locator-based iFIT on an L3VPN over SRv6 Network

This section provides an example for configuring peer locator-based iFIT end-to-end measurement on an L3VPN over SRv6 network.

Example for Configuring Peer Locator-based iFIT on an EVPN L3VPNv6 over SRv6 Network

This section provides an example for configuring peer locator-based iFIT end-to-end measurement on an EVPN L3VPNv6 over SRv6 network.

Example for Configuring Peer Locator-based iFIT on an EVPN VPWS over SRv6 Network

This section provides an example for configuring peer locator-based iFIT hop-by-hop measurement on an EVPN VPWS over SRv6 network.

Example for Configuring iFIT in Public Network Traffic over SRv6 Scenarios

This section provides an example for configuring iFIT to implement hop-by-hop packet loss and delay measurement in public network IPv4 over SRv6 scenarios.

Example for Configuring Bidirectional Flow-based iFIT on an L3VPN

This section provides an example for configuring bidirectional flow-based iFIT hop-by-hop measurement on an L3VPN.

Example for Configuring iFIT Measurement Based on Dynamic Flow Learning

This section uses an L3VPN as an example to describe how to use iFIT dynamic flow learning to implement end-to-end packet loss and delay measurement.

Example for Configuring iFIT Measurement in Inter-AS VPN Option A Scenarios

This section provides an example for configuring iFIT to implement hop-by-hop packet loss and delay measurement in inter-AS VPN Option A scenarios.