Configuration Examples for RIP

Example for Configuring Basic RIP Functions

This section describes how to configure basic RIP functions, including how to enable RIP and configure the RIP version number on each device.

Example for Preventing Routing Loops

This section uses split horizon as an example to describe how to prevent routing loops.

Example for Configuring RIP to Import External Routes

This section describes how to configure RIP to import external routes to increase the number of routes in the RIP routing table.

Example for Configuring Dynamic BFD for RIP

This section provides an example showing how to configure BFD on a RIP network to rapidly detect and notify link faults.

Example for Configuring Static BFD for RIP

This section provides an example for configuring static BFD for RIP.