Configuration Examples for NQA

Example for Configuring an NQA Test to Detect the DNS Resolution Speed on an IP Network

This section provides an example for configuring an NQA test to measure the performance of interaction between a client and the DNS server.

Example for Configuring an NQA TCP Test to Measure the Response Time on an IP Network

This section provides an example for configuring an NQA TCP test to measure the response time on an IP network.

Example for Configuring an NQA UDP Jitter Test to Monitor the VoIP Service Jitter Time

This section provides an example for configuring an NQA UDP jitter test to monitor the jitter time for Voice over Internet Protocol (VoIP) services.

Example for Configuring an NQA LSP Ping Test to Monitor MPLS Network Connectivity

This section provides an example for configuring an NQA LSP ping test to monitor MPLS network connectivity.

Example for Configuring a Generalflow Test in a Native Ethernet Scenario (RFC 2544)

This section describes how to configure a generalflow test in a native Ethernet scenario. A generalflow test is used to monitor the native Ethernet network performance.

Example for Configuring a Generalflow Test in the IP Gateway Scenario (RFC 2544)

This section describes how to configure a generalflow test in the IP gateway scenario. The generalflow test monitors the Ethernet network performance.

Example for Configuring a Layer 2 Ethernet Service Activation Test (Y.1564)

This section describes how to configure a Layer 2 Ethernet service activation test to check whether network performance complies with the SLA.

Example for Configuring an Ethernet Service Activation Test in a Layer 3 Scenario (Y.1564)

This section provides an example for configuring an Ethernet service activation test in a Layer 3 scenario to check whether network performance meets SLAs.

Example for Configuring an Ethernet Service Activation Test on an EVPN VXLAN (Y.1564)

An Ethernet service activation test is configured on an EVPN VXLAN to check whether network performance meets SLA performance indexes.

Example for Configuring Test Results to Be Sent to the FTP Server

Delivering the test results to the FTP server can save the test results to the maximum extent.