Configuration Examples for L2VPN Accessing L3VPN

You can learn the configuration procedures based on the configuration flowchart. Each configuration example consists of such information as the networking requirements, configuration notes, and configuration roadmap.

Example for Configuring a Local CCC to Access an L3VPN: A local Circuit Cross Connect (CCC) can be configured to access an L3VPN through a VE-Group.

Example for Configuring the Access of LDP VPWS to the Public Network: This part describes how to configure an LDP VPWS to access the public network.

Example for Configuring an LDP VPWS on a Global-VE Interface to Connected to a Public Network: This part describes how to configure an LDP VPWS to access the public network.

Example for Configuring VPLS Accessing L3VPN (IP RAN Scenario): The mixed VPN solution is a component of the IPTime MBB solution, which is developed by Huawei for constructing an IP MBH network.

Example for Configuring the Access of PW Redundancy in Independent Mode to L3VPN (IP RAN Scenario): Mixed VPN is a bearer mode used by the IPTime MBB solution. This solution is a major solution for IP mobile backhaul (MBH) networks that Huawei builds.

Example for Configuring PW APS-protected Static VPWS SS-PW Accessing L3VPN (IP RAN Scenario): This section provides an example for configuring a static VPWS PW with PW APS protection on the L2VPN side to access an L3VPN.

Example for Configuring an L2VPN to Access L3VPNs Through Sub-interfaces for QinQ Termination: This part describes how to configure an L2VPN to access multiple L3VPNs through sub-interfaces for QinQ VLAN tag termination.

Parent Topic: L2VPN Accessing L3VPN Configuration

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic