Configuring Examples for SR-MPLS TE

Example for Configuring L3VPN over SR-MPLS TE

This section provides an example for configuring L3VPN over an SR-MPLS TE tunnel to ensure secure communication between users of the same VPN.

Example for Configuring VPLS over SR-MPLS TE

The public network tunnel for an LDP VPLS network can be an SR-MPLS TE tunnel.

Example for Configuring BD EVPN IRB over SR-MPLS TE

This section provides an example for configuring BD EVPN IRB over SR-MPLS TE.

Example for Configuring EVPN VPLS over SR-MPLS TE (EVPN Instance in BD Mode)

This section provides an example for configuring an SR-MPLS TE tunnel to carry EVPN VPLS services.

Example for Configuring EVPN VPLS over SR-MPLS TE (Common EVPN Instance)

This section provides an example for configuring an SR-MPLS TE tunnel to carry EVPN VPLS services.

Example for Configuring EVPN L3VPNv6 over SR-MPLS TE

This section provides an example for configuring EVPN L3VPNv6 to iterate traffic over an SR-MPLS TE tunnel.

Example for Configuring the Controller to Run NETCONF to Deliver Configurations to Create an SR-MPLS TE Tunnel

This section provides an example for configuring the controller to run NETCONF to deliver configurations to create an SR-MPLS TE tunnel.

Example for Configuring Static BFD for SR-MPLS TE

This section provides an example for configuring static BFD for SR-MPLS TE to implement rapid traffic switching if a tunnel fault occurs.

Example for Configuring Dynamic BFD for SR-MPLS TE LSP

This section provides an example for configuring dynamic BFD for SR-MPLS TE LSP. Dynamic BFD for SR-MPLS TE LSP rapidly detects faults of SR-MPLS TE LSPs, which protects traffic transmitted on SR-MPLS TE LSPs.

Example for Configuring TI-LFA FRR for a Loose SR-MPLS TE Tunnel

Topology-Independent Loop-Free Alternate (TI-LFA) FRR can be configured to enhance the reliability of a Segment Routing (SR) network.

Example for Configuring an E2E SR-MPLS TE Tunnel (Explicit Path Used)

An inter-AS E2E SR-MPLS TE tunnel can be configured to provide a secure data channel for services, for example, inter-AS VPN services.

Example for Configuring CBTS in an L3VPN over SR-MPLS TE Scenario

This section provides an example for configuring class-of-service-based tunnel selection (CBTS) in an L3VPN over SR-MPLS TE scenario.

Example for Configuring CBTS in an L3VPN over LDP over SR-MPLS TE Scenario

This section provides an example for configuring class-of-service-based tunnel selection (CBTS) in an L3VPN over LDP over SR-MPLS TE scenario.

Example for Configuring DSCP-Based IP Service Recursion to SR-MPLS TE Tunnels

This section provides an example for configuring IP service recursion to SR-MPLS TE tunnels based on the differentiated services code point (DSCP) values of IP packets.