Configuration Examples for Layer 2 Multicast

Example for Configuring IGMP Snooping for a VLAN

This section provides an example for configuring IGMP snooping for a VLAN in typical Layer 2 networking.

Example for Configuring IGMP Snooping for a VSI

This section provides an example for configuring IGMP snooping for a VSI in typical VPLS networking.

Example for Adding an Interface to a Multicast Group Statically

This section provides an example for adding an interface to a multicast group statically.

Example for Configuring Layer 2 Multicast SSM Mapping

This section provides an example for configuring Layer 2 multicast SSM mapping.

Example for Configuring Multicast Functions in Daisy-Chain Networking

This section provides an example for configuring multicast functions in daisy-chain networking. Deploying multicast services in daisy-chain networking prevents the transmission of duplicate multicast data on a MAN ring, thereby saving network bandwidth.

Example for Associating a Multicast VLAN with Specified User VLANs

This section provides an example for associating a multicast VLAN with specified user VLANs.

Example for Configuring Layer 2 Multicast Entry Limit in a VLAN Scenario

This section provides an example for configuring Layer 2 multicast entry limit in a VLAN scenario.

Example for Configuring the Layer 2 Multicast Entry Limit in a VSI Scenario

This section provides an example for configuring the Layer 2 multicast entry limit in a VSI scenario.

Example for Configuring Layer 2 Multicast CAC for a VSI

This section provides an example for configuring Layer 2 multicast CAC for a VSI.

Example for Configuring a Backup Device to Forward Multicast Data Flows Through a Backup Link

This section provides an example for configuring a backup device to forward multicast data flows through a backup link on a VPLS network. With this configuration, the backup device can forward multicast data flows immediately after the master device or primary link fails, improving service transmission reliability and minimizing service loss.

Example for Configuring a Layer 2 Multicast Instance for VLAN Users

This section provides an example for configuring a Layer 2 multicast instance for VLAN users who request for the same multicast group's data from the same source.

Example for Configuring a Layer 2 Multicast Instance for VSI Users

This section provides an example for configuring a Layer 2 multicast instance for VSI users who request for the same multicast group's data from the same source.

Example for Configuring the System to Retain the Original Tag and Add Another Tag to an MLD Report Message in L2VPN Access to L3VPN Scenarios

This section provides an example for configuring the system to reserve the original tag and add another tag to an MLD Report message when the message is forwarded from an L2VE sub-interface to an L3VE QinQ VLAN tag termination sub-interface.

Example for Configuring MLD Based on QinQ Termination

This section provides an example for configuring MLD based on QinQ termination.