IS-IS Configuration Examples

This section describes IS-IS configuration examples.

Example for Configuring Basic IS-IS Functions: This section describes how to configure basic IS-IS functions, including specifying the NET, configuring the IS-IS level, and enabling IS-IS on each device.

Example for Configuring IS-IS DIS Election: This section describes how to configure the IS-IS DIS election, including configuring basic IS-IS functions and configuring the DIS priority on each device.

Example for Configuring IS-IS Load Balancing: This section describes how to configure IS-IS load balancing.

Example for Configuring IS-IS to Interact with BGP: This section describes how to configure IS-IS to interact with BGP, including configuring BGP and IS-IS to import routes from each other.

Example for Configuring IS-IS Multi-Instance Processes: This section provides an example for configuring IS-IS multi-instance processes.

Example for Configuring Static BFD for IS-IS: This section describes how to configure static BFD for IS-IS, including configuring BFD parameters and enabling static BFD.

Example for Configuring Dynamic BFD for IS-IS: This section describes how to configure dynamic BFD for IS-IS, including configuring basic IS-IS functions, setting the interface cost, configuring BFD for the IS-IS process, and configuring BFD for the IS-IS interface on each device.

Example for Configuring Dynamic BFD for IPv6 IS-IS: This section provides an example for configuring dynamic BFD to fast detect failures and trigger fast switchover of service traffic on IS-IS IPv6 networks.

Example for Configuring Basic IS-IS IPv6 Functions: This section describes how to configure basic IS-IS IPv6 functions, including enabling IPv6 globally, configuring an IPv6 address and enabling IPv6 for each interface, and configuring basic IS-IS functions and enabling IPv6.

Example for Configuring IS-IS MT: The following example shows how to implement network interconnection using IS-IS on a network with an IPv4/IPv6 topology.

Example for Configuring Routing Loop Detection for Routes Imported from OSPF to IS-IS: This section provides an example for configuring routing loop detection for routes imported from OSPF to IS-IS.

Example for Configuring IS-IS Auto FRR

Example for Configuring IS-IS Route Summarization: This section provides an example showing how to configure route summarization.

Example for Configuring Local MT: This section provides an example showing how to configure local MT on IS-IS networks so that multicast packets can be transmitted on a TE tunnel.

Parent Topic: IS-IS Configuration

Copyright © Huawei Technologies Co., Ltd.

Copyright © Huawei Technologies Co., Ltd.

< Previous topic